BMDDC - MICROIMAGE 2400 FIXER

  • MSDS: BMDDC
  • Manufacturer: ALTA CHEMICAL CORP
  • Product Name: MICROIMAGE 2400 FIXER
  • National Stock Number: 6850-00N026836
Product Identification

Product ID:MICROIMAGE 2400 FIXER
MSDS Date:06/01/1988
FSC:6850
NIIN:00N026836
MSDS Number: BMDDC

Responsible Party
ALTA CHEMICAL CORP.
11526 SORRENTO VALLEY ROAD, SUITE F
SAN DIEGO, CA 92121-1314
US

Emergency Phone: 619-453-5010

Info Phone: 619-453-5010

Cage: 8L886

Contractor
ALTA CHEMICAL CORP.
SAN DIEGO, CA 92121-1314 US

Telephone: 619-453-5010

Cage: 8L886

Ingredients

THIOSULFURIC ACID, DIAMMONIUM SALT; (AMMONIUM THIOSULFATE)

CAS: 7783-18-8

RTECS: XN6465000


ACETIC ACID

CAS: 64-19-7

RTECS: AF1225000

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM;15 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


SODIUM HYDROXIDE

CAS: 1310-73-2

RTECS: WB4900000

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE AND SKIN IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NON-CARCINOGENIC

First Aid

First Aid:UPON CONTACT, IMMEDIATELY FLUSH WITH WATER AND REMOVE
CONTAMINATED CLOTHING. SEEK MED ATTN. INHAL: REMOVE TO FRESH AIR.
EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN: FLUSH WITH WATER
FOR AT LEAST 15 MIN. INGEST: PRESCRIBE EMETICS TO INDUCE VOMITING.
CALL A PHYSICIAN.

Fire Fighting

Extinguishing Media:NOT APPLICABLE. EXTINGUISHING MEDIA SUITABLE FOR
SURROUNDING FIRE .
Fire Fighting Procedures:NOT APPLICABLE. WEAR NIOSH/MSHA APPROVED SCBA
AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:PREVENT SPREAD OF SPILL. ABSORB WITH SAND OR
INERT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:AVOID CONTACT WITH SKIN OR EYES. DO NOT SWALLOW.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR OPTIONAL.
Ventilation:LOCAL EXHAUST: NORMAL. MECHANICAL (GENERAL): NORMAL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE SLEEVES AND APRON OPTIONAL.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:C3
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:18
Vapor Density:1
Spec Gravity:1.08
pH:5.0
Evaporation Rate & Reference:1 (H*20=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS SOLUTION, SLIGHT ACETIC ODOR.
Percent Volatiles by Volume:70

Stability

Stability Indicator/Materials to Avoid:YES
AVOID STRONG BASES.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:OXIDES OF SULFUR.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.